Setting your Mickey Mouse Digital clock

Information on how to properly set and use your digital Mickey Mouse clock.

Features of buttons when not in Time Set mode

A - Turns alarm on and off

B - Press to access Alarm Set mode

C - Light function / Snooze function

D - Changes temperature display between Fahrenheit and Centigrade

E - Press and hold for two seconds to start Time Set mode

Setting time/date/alarm for your Mickey Mouse digital clock

Press and hold "TIME SET" (button E in above photo) until you hear a beep. When in time setting mode, each successive press of the "TIME SET"  button will allow you to adjust the next setting. The following is the sequence it will follow:

Seconds (displays where the temperature is normally shown)
Hour
Minute
Year
Month
Day

The time/date setting, that is currently selected, will flash to indicate that it can now be changed. To adjust, press "UP" (button D in above photo) until you reach the desired number. When the desired number is reached, click the "TIME SET" button to move to the next setting. Progress in the same manner until you have gone through all 6 settings.

After you have set the "Day", and click the "TIME SET" button again, it will go back to normal mode (if you do not press the "TIME SET" button after adjusting the time, it will automatically go back to regular mode after one minute).

Setting Alarm

Press and hold "ALARM SET" (button B in above photo) until you hear a beep. The hour indicator in the alarm box (bottom-middle of clock display), will flash to indicate it can now be adjusted. Press "UP" (button D in above photo) until you reach the desired hour. Please note that if you have selected a PM hour it will show a "P" to the left of the time shown in the alarm box. Press "UP" again to switch to minutes to adjust this number. Press "UP" once more to leave alarm set mode.

To turn the alarm on, press "ALARM ON/OFF" (button A in above photo). When on, a little bell will be displayed in the alarm box (a beep will sound to also let you know it is set). To turn off alarm, press "ALARM ON/OFF". To stop the alarm from going off at the same time the next day, click "ALARM ON/OFF" again, the little bell will disappear.

Press "SNOOZE/LIGHT" (button C in above photo) to get five more minutes of rest when the alarm goes off. When the snooze function is active, "SNOOZE" will flash to the right of the bell.

Additional Notes

To set the current time for PM, adjust the hour setting until you see a "PM" showing before the time.

Pressing the "UP" button when in normal mode will switch the temperature setting between Fahrenheit and Centigrade.

Press "SNOOZE/LIGHT" (button C in above photo) to light up clock display for viewing at night.